- Economical and practical.Cost-effective. Alloy wire is not as expensive as pure gold wire,reduce cost of use.Great for small projects and beginners.More choices for customers.
- 8X32 256Pixels. 32 horizontal pixels and 8 vertical pixels . Width :8cm (3.15in) Length:32cm(12.59in).Highly smart. Each LED is individually addressable. You can set each LED as you wish to scroll messages or draw little images.
- Wide compatibility. It works great with Arduino, Raspberry Pi, FastLED library, Rainbowduino, SP107E, K1000C,T1000S, etc.With different controllers, it has different effects, spectrum music mode, rolling subtitle, picture display, video display, fireworks effect and chase effect
- Chainable and bendable design. You can extend the panel by hooking them up one by one with the 3pin JST connectors. Flexible FPCB can be gently bent and curved around surfaces. Can be spliced into a large pixel screen
- Save your money. It is sturdy, beautiful and very comparable to other similar products. Making led screenDIY , advertising board, apply to hotel, KTV, bars, indoor advertising signs, Festivel Christmas or wedding party decoration,It has adhesive glue on the back, so you can stick it to the wall or other items conveniently as you like.
Product Description
- IC type :WS2812B IC Built-in
- Color order : G R B(NOT RGB)
- Gray level: 256
- View angle: 120°
- Input voltage:DC5V Do not use DC12V or DC24V
- FPCB: Flexible
- Color: full color 24-bit
- FPCB board color: Black
- Power:0.1W~0.3W/LED Total 25W~75W (The value will change depending on the effect.)
- Recommended power supply:DC5V10A(50w) or DC5V20A (100W)
- Pixel Qty: 32pixels x 8 pixels Total 256 Pixels
- Operating Temperature: -20 ~ +50°C
- Length xWidthx Height:32cmx8cmx0.2cm
- Waterproof level: IP30 non-waterproof
- When you light up 1 color(red or green or blue) , 0.1W/LED . If you light up 2 colors (red+green) ,0.2W/LED , when you light up 3 colors (red+green+blue=white light), 0.3W/LED
- Note: All white light, power is 75W, wires generate a lot of heat, Do not recommended to light all white light, it will reduce the LED life and it will be very harsh
Features
- Individually Addressable
Using a programmable controller and you can program every led just you like. Every one led has its own IC chip.one IC controll one led.The chip buil in led.
- Ultra Bright
Brightness can be adjusted freely.Do not stare at it for a long time, otherwise you will be dazzled when the led Brightness is the brightest.
- Colorful
Red ,Green, Blue .Dream full color. curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software
- Long life
Life span:more than 50000hrs
- Spliceable
You can connect many LED matrix as one big LED matrix with more pixels
Size
- WS2812B 8X32 ECO LED Matrix : Length : 32cm/12.6in Width: 8cm/3.15in
- WS2812B 8X32 ECO LED Matrix: Number of horizontal pixels:32 pixels Number of vertical pixels:8pixels Total 256 pixels
- WS2812B 8X32 ECO LED Matrix: The length LED beads:5mm The width LED beads:5mm
- 2427 11x44 LED Matrix : Length : 32cm/12.6in Width: 8cm/3.15in
- 2427 11x44 LED Matrix: Number of horizontal pixels:44pixels Number of vertical pixels:11pixels Total 484 pixels
- 2427 11x44 LED Matrix: The length LED beads:2.7mm The width LED beads:2.4mm
Spliceable
- LED matrix of different sizes or of the same size can be assembled at will
- With 3PIN-JST connector, you can easily connect LED matrix in series
- When splicing, be sure to add DC5V to every LED matrix .Prevent overheating of wires
- White light consumes a lot of power, it is not recommended to light up all white light